New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Riverside pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Awning & Hopper Windows in Riverside, CA
Awning windows hinge at the top and crank outward from the bottom, so they shed rain while staying open. Hopper windows hinge at the bottom and tilt inward from the top, making them a natural fit for basements, bathrooms, and foundation-level openings where ventilation matters more than a view. In Riverside’s hot, dry climate, both styles earn their keep: awning windows let you catch the late-afternoon breeze without inviting the sun’s full force indoors, and hoppers pull cooler air up through stuffy lower rooms. At Westlight Windows Riverside, we’ve installed both styles across Riverside’s older ranch homes and newer stucco builds since 2009, and we carry hopper and awning units from Window Installation lines that actually fit the opening, not whatever’s sitting in a warehouse. Call us at (760) 624-3669 and we’ll talk through what your walls can take.
Key Takeaways
- Awning windows hinge at the top and open outward; hopper windows hinge at the bottom and open inward. Both work well in Riverside’s climate for different rooms.
- Most awning or hopper window replacements in Riverside run $450 to $950 per unit installed, depending on size, frame material, and glass package.
- We carry awning and hopper windows from PGT, CGI, and ViewLux, so you get a real choice in glass and frame, not a take-it-or-leave-it option.
- Every job comes with a written price before work starts and a written guarantee on the completed install. If the work fails within the guarantee period, we come back and fix it at no charge.
- Our phone is answered by a real person in Riverside, 24 hours a day, 7 days a week. Not a voicemail box.
When You Need Awning & Hopper Windows
These aren’t the flashiest windows in the Window Installation catalog, but they solve specific problems better than anything else. Here’s when Riverside homeowners call us:
- You want to leave windows open during Riverside’s winter drizzle. Awning windows open outward like a small canopy, so light rain hits the glass and slides off instead of soaking the sill. In neighborhoods like Canyon Crest and Mission Grove, where winter mornings bring a fine mist, that means actual ventilation without babysitting the weather.
- A basement or below-grade room stays stuffy and smells off. Hopper windows sit low and tilt inward, which pulls cooler outside air across the floor. Riverside doesn’t have many true basements, but plenty of older homes in the Wood Streets have utility rooms or converted garages that need exactly this kind of low-level airflow.
- Your current crank-out windows are seized, stripped, or missing the handle entirely. Riverside’s dry heat bakes the grease out of window hardware. We regularly see awning windows in Hawarden Hills that haven’t been opened in years because the crank gear stripped. Replacing the entire unit with a modern awning window restores the function and the seal.
- You need ventilation in a bathroom or laundry room without giving up privacy or wall space. Hoppers sit up high or down low and tilt inward at an angle that lets air move without turning your window into a display case. In Riverside’s tighter mid-century floorplans, this is the difference between a room that breathes and a room that holds moisture.
- Your old aluminum-framed awning windows sweat, stick, or rattle when the Santa Anas blow. Aluminum conducts heat and cold, and wind finds every loose corner. Newer frames with proper weatherstripping and better glass stop the draft and the sticking in one job.
- You’re replacing a basement or utility-room window and want something that won’t rot. Riverside’s summer sun and occasional downpours are hard on wood frames. Vinyl and aluminum alternatives from PGT and ViewLux hold up better and need almost nothing from you year to year.
Our Awning & Hopper Windows Process
We’ve been replacing windows in Riverside since 2009, and the process hasn’t changed much in that time because it works. Here’s what happens when you call Westlight Windows Riverside:
- You call (760) 624-3669 and talk to a real person. No phone tree, no chatbot. We ask about the room, the window size, and what’s wrong with the current unit. If it sounds like we can help, we schedule a visit during a window that works for you.
- We measure the opening and check the wall around it. Older Riverside homes sometimes have framing that’s settled or dry-rotted around the opening. We look before we quote so the written price reflects the actual job, not a guess.
- You get a written price before any work starts. This is the Kingswell Way, and it’s non-negotiable for us: the number on paper is the number you pay. No revised invoice at the door, no surprise line item. The price covers the window, the install, and the cleanup.
- We order from the manufacturer line that fits the job. For Riverside’s sun exposure, we often spec PGT or CGI units with low-e glass (a thin coating that reflects heat back into the room in winter and out in summer). For tighter budget jobs, ViewLux awning and hopper windows deliver solid performance without the premium price.
- We install on the day we said we’d install. A uniformed, background-checked technician does the work. Old window comes out, new one goes in, insulation is checked, trim is set, and the unit is tested for smooth operation before we call it done.
- We clean up, walk you through the window, and hand you the written guarantee. You’ll know how to operate the crank or hinge, how to clean the glass, and what to do if anything feels off later. Then we leave. The site looks like we were never there, except for the new window.
Awning & Hopper Windows Pricing in Riverside
Most awning or hopper window replacements in Riverside run $450 to $950 per unit installed, depending on three things: the size of the opening, the frame material, and the glass package you choose. Here’s how that breaks down:
| Factor | Typical Range | What You Get |
|---|---|---|
| Small hopper window (2′ x 2′ or similar) | $450 – $650 | Vinyl frame, single or double-pane clear glass, standard install |
| Medium awning window (3′ x 3′ or similar) | $550 – $800 | Vinyl or aluminum frame, double-pane, standard install |
| Large custom awning window | $800 – $1,200+ | Larger glass area, upgraded frame, possible structural work |
| Impact-rated glass upgrade | +$150 – $400 per unit | PGT or CGI impact glass, common in higher-wind areas east of Riverside |
| Low-e glass coating | +$50 – $150 per unit | Reflects heat, cuts glare, helps with AC load in Riverside summers |
What pushes a job toward the higher end? A rotted frame that needs repair before the new window goes in, an opening that’s out of square, or a wall that needs extra insulation work. What keeps it lower? A standard-size opening in good condition, a straightforward swap, and a vinyl frame instead of aluminum or wood-clad. Riverside’s older neighborhoods, like the areas around Victoria Avenue and Magnolia Center, tend to have more of the former: settling, older framing, and odd opening sizes that a good installer just has to account for.
A note on glass: Riverside gets more than 270 sunny days a year. A double-pane window with a low-e coating will pay for itself over time in reduced cooling costs, especially on west-facing walls where the afternoon sun beats in. If the window faces the Santa Ana wind corridors through the Box Springs pass, impact-rated glass from CGI or PGT may be worth the upgrade for the noise reduction alone. You’ll see all of these options itemized in your written quote, and we won’t push one over another without explaining the math. Call (760) 624-3669 for a free estimate and we’ll put real numbers on your specific opening.
Why Riverside Homeowners Choose Westlight for Awning & Hopper Windows
Westlight Windows Riverside is an independently owned and operated Kingswell location, led by Owen Satterfield. That distinction matters because it means our reputation rides entirely on the jobs we do here in Riverside, not on a distant corporate office. Here’s what that looks like in practice:
- We write the price down before we touch your wall. You get a written quote on your first visit. If we discover something behind the wall during install, we stop and talk to you before spending another dollar. That’s the Kingswell Guarantee, and it’s on every single project.
- We offer the 365-Day Done Right Promise. If any part of the install isn’t right within the guarantee period, we return and correct it at no charge. That includes a free second visit if a repair fails. No negotiating, no fine print.
- We carry eight manufacturer lines, not one. For awning and hopper windows specifically, we match your opening and your budget to the right product. ViewLux for solid value, PGT for Florida-grade impact testing (which translates well to Riverside’s summer winds), CGI for coastal-grade engineering, and CWS when the job calls for heavy-duty commercial hardware. We’re not loyal to a brand; we’re loyal to the opening in your wall.
- Our technicians are background-checked and uniformed. You’ll know exactly who’s walking through your door, and you’ll know they’ve installed this window style before. No subcontractor roulette.
- Live phone coverage, 24/7. If your awning window won’t close before a storm and it’s 11 p.m., a real human answers. That person can schedule, answer questions, or dispatch help. We don’t hide behind a voicemail box.
The name comes from the west light: that late-afternoon sun that pours through a good window, bright and warm and worth doing right. Garden Windows, awning and hopper windows are small, but they sit exactly where that light comes in low, and they get every bit of our attention.
FAQs – Awning & Hopper Windows
How much does it cost to replace an awning window in Riverside?
In Riverside, most awning window replacements run $550 to $950 per unit installed, with small units starting around $450 and large custom awning windows reaching $1,200 or more. Your written quote from Westlight Windows Riverside will itemize the window, the install, and any glass upgrades like low-e or impact-rated glass, and that number is fixed before any work starts. Call (760) 624-3669 for an exact quote on your opening, free of charge.
Are hopper windows good for bathrooms and basements?
Yes, hopper windows are an excellent choice for bathrooms, basements, and utility rooms because they hinge at the bottom and tilt inward, pulling air in low and circulating it through the room without sacrificing privacy or wall space. In Riverside homes with converted garages or below-grade utility rooms, a hopper window is often the most practical way to get real ventilation into a room that otherwise holds moisture and stale air. We install hopper units from PGT and ViewLux in standard and custom sizes.
Can you replace an awning or hopper window the same day?
In many cases, yes; a single awning or hopper window swap is a same-day install once the window is on hand. If your window is a standard size and the opening is in good condition, our technician can typically complete the job in two to four hours. Larger custom units may require a few extra days for manufacturing. Call us at (760) 624-3669 and we’ll give you a straight answer on timing before you commit.
Is it better to repair or replace an old awning window in Riverside?
If the frame is solid and only the crank mechanism or glass is damaged, a repair is often worth doing; Riverside’s dry heat is hard on gearboxes and seals, and we replace failed hardware regularly. But if the frame is warped, the seal between panes has failed, or the window is more than 20 years old, replacement is almost always the better long-term move. We’ll tell you which one makes sense for your situation and give you a written price either way.
What’s the difference between an awning and a hopper window?
An awning window hinges at the top and cranks outward from the bottom, so it can stay open in light rain; a hopper window hinges at the bottom and tilts inward from the top, making it better for low, basement-level, or privacy-sensitive openings. In Riverside, Casement Windows and awning windows work beautifully on west-facing walls where you want airflow without full sun exposure, while hoppers serve utility rooms, basements, and bathrooms. Both styles are available in the same frame materials and glass packages.
Get a Written Price for Your Awning or Hopper Window
If you’re tired of contractors who quote one number and invoice another, the Kingswell Way will feel different. You’ll get a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the completed work. That’s the whole arrangement, in writing, on every awning and hopper window we install in Riverside. Call (760) 624-3669 today and talk to a real person. We’ll schedule a measurement visit, put a specific number in front of you, and let you decide from there. No pressure, no door-step surprises. Just a window that opens and closes the way it should, and a company that stands behind it.
Written by Owen Satterfield, Owner at Westlight Windows Riverside, serving Riverside.
Six Reasons Homeowners Choose Westlight Windows Riverside
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.